Best Engg. College, Pune
  • KJEI
TCOER
Mechanical Engineering Department-Research & Publications

Mechanical Engineering


Research & Publications

Research Activity Details:

  • Patents Filed 
  • Name of the Inventor: Sandip A. Kale

Title of the invention: Innovative Wind Turbine
Application Number: 2475/MUM/2012
Published:
http://www.ipindia.nic.in/ipr/patent/journal_archieve/journal_2013/pat_arch_092013/official_journal_06092013_part_i.pdf

  • Name of the Inventor: Kumar D Sapate

Title of the invention: Direct Injection for Small Two Stroke SI Engine
Application Number: 410/MUM/2013

 

  • Name of the Inventor: Sandip A. Kale

Title of the invention: Simple Unidirectional Series Rotors Wind Turbine
Application Number: 409/MUM/2013

Publications

  • International Journals (Year: 2013-2014)
  • S.A. Kale , R. N. Verma, “Aerodynamic Design of a Horizontal Axis Micro Wind Turbine Blade Using NACA 4412 Profile”, International Journal of Renewable Energy Research-IJRER, cited in SCOPUS, ISSN: 1309-0127 , April 2014
  • Pathan K. N. “CFD analysis for Production of Carbon Nanotubes”, International Journal of Current Engineering and Technology (IJCET), April 2014
  • Chaudhari S.S., Taji S.G., “ Experimental studies on effect of coil wire on heat transfer enhancement and friction factor of double pipe heat exchanger” International Journal of Computational Engineering Research, Vol.3, Issue 5, May 2014
  • Lahu P.Maskepatil, S.A. Kale , A.U.Gandigude (2014) “ Selection of material for wind turbine blade by using analytic hierarchy process (AHP) method ” Applied Mechanics and Materials - Trans Tech Publications (AMM), cited in SCOPUS.
  • S.R.Kulkarni, P.Sonawane, M.G.Karnik “Effect of Graphite Addition on the Mechanical Properties of Stir cast Particulate Aluminum Metal Matrix Composite Reinforced with Alumina and silicon Carbide”, Applied Mechanics and Materials - Trans Tech Publications (AMM), cited in SCOPUS.
  • Hole Vijay, N.R. Rajhans, “ Performance Evaluation of an Engine assembly line through simulation” Applied Mechanics and Materials - Trans Tech Publications (AMM), cited in SCOPUS.
  • A. A. Joshi, R.G.Gore, K. Sundaram, “Experimental optimization of thickness of protective padding of two wheeler riders helmet”, Applied Mechanics and Materials - Trans Tech Publications (AMM), cited in SCOPUS,

            (Year: 2012-2013)

  • Sapate. K. D., Dr, Miss. Tikekar. A.N., “Mechanical Modifications to convert small two strokes carbureted engine to Electronic Fuel Injection system engine to reduce
    emission and fuel consumption”, Volume 768, ‘Energy Efficient Technologies for Sustainability’ in Advanced Materials Research, Print ISSN No.:1022-6680, (Switzerland) (Indexed by Elsevier: SCOPUS www.scopus.com and Ei-Compendex (CPX) www.ei.org/ , Cambridge Scientific Abstracts) 2013
  • S.A. Kale, S.N. Sapali, “Development and Field Test Performance of a Nonconventional Unidirectional Co-Axial Two Series Rotors Micro Wind Turbine”, Volume 768, ‘Energy Efficient Technologies for Sustainability’ in Advanced Materials Research, Print ISSN No.:1022-6680, (Indexed by Elsevier: SCOPUS www.scopus.com and Ei-Compendex (CPX)www.ei.org/, Cambridge Scientific Abstracts) ,doi:10.4028/www.scientific.net/AMR.768.119, 2013
  • S.A. Kale, S.N. Sapali, “A review of multi-rotor wind turbine systems”, Journal of Sustainable Manufacturing and Renewable Energy, Volume 2 Issue 1-2, 2013
  • S. V. Mutalikdesai, “Experimental Investigation of Oil Fired Boiler for Different Steam Generation Rate”, International Journal of Mechanical Engineering and Sciences, ISSN 2249-7455, Vol. 1, Issue 7(II), April 2012, Page 25-28
  • G. P. Bharambe, A. M. Patil, “Using Solar Energy in Kitchen”, International journal of Mechanical Engineering and Sciences, ISSN 2278-7549, 2012
  • G. P. Bharambe, V.B. Ghagare, “Energy Management – An Effective Profit Optimizing  Tool”, International journal of Mechanical Engineering and Sciences, ISSN 2278-7549, 2012
  • Sapate. K. D., Dr, Miss. Tikekar. A.N., “Design and Development of Gasoline Direct Injection for small Two Stroke Engine”, International Journal of Mechanical Engineering and Technology, Vol 3, Issue -2, 2012, Impact Factor – 3.807

International Conference Proceedings (Year: 2013-2014)

  • P.S. Dabeer, G. K. Purohit, “Determination of Surface Roughness by Ball Furnishing Process using Factorial Techniques” ,International Conference on Mechanical and Mechatronics Engineering organized by WASTE, Singapore, 4-5 July, 2013
  • Kale, S. A. , Sapali, S. N., Tanksale, A. N., “ Development and Field Testing of an Inclined Flanged Compact Diffuser for a Micro Wind Turbine”, The 2014 International Conference of Mechanical Engineering, London, U.K., 2-4 July 2014, (Accepted)
  • Sandip Kale, Ajinkya Tanksale and Mahasidha R. Birajdar, “A Review of Effects of Design Parameters on Aerodynamic Performance of Small Wind Turbines”, IEEE International Conference on Non Conventional Energy (ICONCE 2014), Kalyani, India, January 16 – 17, 2014 (Accepted)
  • Sandip Kale and Suraj Shravgi, “Comprehensive Assessment of Materials and Manufacturing Methods for Small Wind Turbine Blade”, IEEE International Conference on Non Conventional Energy (ICONCE 2014), Kalyani, India, January 16 – 17, 2014 (Accepted)
  • R. G. Gore, A. A. Joshi, K Sundaram, “ Manufacturing of Headforms for Testing of Motorcycle Helmets: A Review”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014.
  • Pathan K. N, Snehal C. Kapse, “CFD analysis for Production of Carbon Nanotubes”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014.
  • M. R. Babar, R. G. Gore, J. P. Hugar, G. S. Jagdale, “Gas Turbine blade cooling techniques: a review”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014
  • A. S. Sadikot, R. G. Gore, V. j. Hole, “Sonofusion: a revolutionary new energy source ”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014
  • K. Yadav, R. G. Gore, M. R. Birajdar, “Modification of dust Collector to improve collection efficiency”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014
  • S.R.Kulkarni, P.Sonawane, M.G.Karnik “Effect of Graphite Addition on the Mechanical Properties of Stir cast Particulate Aluminum Metal Matrix Composite Reinforced with Alumina and silicon Carbide”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014
  • S.R.Kulkarni, P.D.Chougule S.A.Kale “Innovative Wind Turbines – A Review ”, ISET 2014, Organized by Department of Mechanical Engineering, Trinity College of Engineering & Research, Pune,  January 9-10, 2014
  • Chandgude A.K., Mahajan S.D., MutalikDesai S.V., “ Experimental Investigation of variable speed on the performance of two stroke engine by using Direct Injection System” International Conference on Automotive Technology, January 9-10, 2014
  • Chandgude A.K., Mahajan S.D.,Sapate S.D., “ The potential of Electronically operated gasoline Direct Fuel Injection system for small displacement two stroke SI Engine.” International Conference on Automotive Technology, January 9-10, 2014
  • Shaikh Aslam B., Wable Ganesh K., Chandgude Abhimanyu K., “Analysis of Variation in readings of various instruments used in testing, adjusting and balancing of HVAC systems” International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • A.Tanksale ,P. Bahulikar, Joshi G., A.Kulkarni V.B.Ghagare “Design and Development of Swirl Test Rig for Measurement of Swirl Ratio, Flow Measurement”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Mankar S.H., Deshmukh S. J., Kolhe K. P , J. B. Sankpal,” Mechanical and Structural Characterization of GMAW AA7020 Multipass Butt weld Joint”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • M.  J. Babar, J. P. Hugar,G. S. Jagadale, R. G. Gore,”Gas Turbine Blade Cooling Techniques: A Review” International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • M. S. Shaikh, Rajiv B. ,  B. B. Ahuja ” Criticality Analysis of Barge Loader Using FMECA”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Suraj D.Shravage, Kale S. A.,  V. H. Nyayadhish, “Material Selection for a Small Wind Turbine Blade”
  • International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • B. N. Sontakke, J. B. Sankpal, Mankar S. H. ,” Surface Creation Using Scanned Point Clouds with Sharp Features”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • B. N. Sontakke, Lonkar P. T., P.P. Akarte, “Heterogeneous Object Modeling Using Unstructured T-Splines”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • M.S. Kale, S. H. Mankar, J. B. Sankpal, V. S. Shinde, “Analysis of Fluid and Thermal Flow due to Disproportional Heating” International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Ajit M. Kate, Sachin V. Mutalikdesai,”Investigation of Thermal Performance and Heat Transfer Characteristics of circular and elliptical geometry Wickless Heat Pipes”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Maskepatil L. P, “Selection of Material for Wind Turbine Blade using Analytic hierarchy Process (AHP) Method”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Mutalikdesai Sachin V., Chandgude Abhimanyu K.,” Analysis of Temperature Variation of Flue Gases in Various Zones of Oil Fired Boiler for Different Steam Generation Rate”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • S. S. Kadbane, S.S. Gavate, A. S. Raskar, A. A. Phalke , A. N. Tanksale,” Comparative Analysis of Various Wingtip Devices for General Effective Selection: A Review”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Vijay Hole , N.R.Rajhansa , A.V.Mulay,” Performance Evaluation of an Assembly line with the help of Simulation”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Kolhe K. P, Mankar S.H. , C. K. Dutta , Deshmukh S. J.,” Influence of Welding Parameters on the Microstructure and Mechanical Properties of Multipass Submerged Arc Welding”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Mankar S.H., Deshmukh S. J., J. B. Sankpal, Sontakke B.N.,” Six Sigma Strategy for World Class Quality – A Case Study”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • Pawan Kumar, S. H. Mankar, C. K. Datta and Kolhe K. P,” Optimization of Process Parameters of Aluminium Alloy 6061 with Pulsed Gas Tungsten Arc Welding (GTAW)”, International Conference on Design, Manufactring and Mechatronics, January 9-10, 2014.
  • G. P. Bharambe, D. K.  Gaikwad, A. M. Patil, “Phase Change Materials: Effective Technique for Improving Energy Efficiency”, International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • Kulkarni S. R.,  P. D. Chougule, Kale S. A, “Innovative Wind Turbines – A Review”, International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • G. P. Bharambe, D. K.  Gaikwad, A. M. Patil,” Energy Audit: A way to achieve Sustainability”, International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • G. P. Bharambe, A. M. Patil, “Role of Engineering Education in Sustainable Development” International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • Birajdar M. R., Ghodake P D, Kale S. A.,” Optimization of 1 KW Power Output Small Wind Turbine Blade” International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • Bhosale Sharad K., Shinde Vivek S., Shinde Sachin.R, “Investigation on the energy consumption for the Freeze Concentration System in milk powder processing method”, International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • A S Sadikot, V J Hole, R G Gore, P D Ghodake, “Sonofusion: A Revolutionary New Energy Source” International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • Birajdar M R, Kale S A, Sapali S N, “Aerodynamic Design of Small Wind Turbine Blade”, International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.
  • Kisve R S, Birajdar M  R, Kale S A, “Review of the Modern Aerofoil’s for Small Wind Turbine Blades”, International Conference on Renewable Energy and Sustainable Development, January 9-10, 2014.

(Year: 2012-2013)

  • Kale S A., Yogesh Gunjal, Sachin Jadhav, Ajinkya Tanksale,  “CFD Analysis for Optimization of Diffuser for a Micro Wind Turbine”, IEEE Xplore Digital Library, Print ISBN: 978-1-4673-6149-1, DOI 10.1109/ICEETS.2013.6533392, INSPEC Accession Number: 13582574 , pp. 257 - 260 , 2013

http://ieeexplore.ieee.org/search/searchresult.jsp?searchWithin=p_Authors:.QT.Kale,%20Sandip%20A..QT.&newsearch=true

  • Bharambe G. P., R. A. Phalke, A. N. Tanksale, M.S. Shaikh, S.A. Kale,  “CFD Analysis for Optimization of Diffuser for a Micro Wind Turbine”, IEEE Xplore Digital Library, Print ISBN: 978-1-4673-6149-1, DOI 10.1109/ICEETS.2013.6533443, INSPEC Accession Number: 13582624 , pp. 546 - 549, 2013

http://ieeexplore.ieee.org/search/searchresult.jsp?searchWithin=p_Authors:.QT.Tanksale,%20A.N..QT.&newsearch=true

  • S.A. Kale, S.N. Sapali, “Power output prediction and Primary Evaluation of a Unidirectional Co-axial Series Rotors Wind Turbine”, IEEE Xplore Digital Library, Print ISBN: 978-1-4673-5150-8, DOI 10.1109/AICERA-ICMiCR.2013.6576030, INSPEC Accession Number: 13698267 , pp. 1 - 3, 2013

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=6576030&sortType%3Ddesc_p_Publication_Year%26queryText%3Dkale

  • A. N. Tanksale, M.S. Shaikh, “Review of Probable application of Rapid Prototyping and Rapid Tooling Techniques in Manufacturing of a Wind Turbine Blade”, International Conference on Advances in Mechanical Engineering, May 29-31, 2013, College of Engineering, Pune.
  • Bharambe G. P., S.A. Kale, A. M. Patil, “Heat Flux between Two
    Parallel Metal Plates with Thermic Fluid as a Media”, International Conference on Advances in Mechanical Engineering, May 29-31, 2013, College of Engineering, Pune.
  • Rahul Gore, Atul Joshi, K Sundaram,  “Experimental Optimization of Thickness of Protective Padding for Two Wheeler Riders Helmet”, International Conference on Advances in Mechanical Engineering, May 29-31, 2013, College of Engineering, Pune.
  • S.A. Kale, S.N. Sapali, “Development and Field Test Performance of a Nonconventional Unidirectional Co-Axial Two Series Rotors Micro Wind Turbine”, 2013 IEEE International Conference on Energy Efficient Technologies For Sustainability organized by St. Xavier's Catholic College Nagercoil, India, 10 Apr - 12 Apr 2013
  • P.S. Dabeer, G. K. Purohit, “Determination of Surface Roughness by Ball Furnishing Process using Factorial Techniques” ,International Conference on Emerging Trends in Mechanical Engineering organized by G. H. Patel COE, Gujarat, India, 4-5 January, 2013
  • A. N. Tanksale, “Passenger Seat Comfort Analysis of Public Transport Vehicles”, International Conference on Humanizing Work and Work Content, Organized by GB Pant University of Agriculture and Technology, Pantnagar and IEA, December 6-8, 2012
  • Kale S A, Sapali S N, “Innovative Multi Rotor Wind Turbine Designs”, International Conference on Wind Energy: Materials, Engineering and Policies, organized by BITS Pilani, Hyderabad Campus, India and Wind Energy Department, Denmark Technical University, Riso Campus,  22 – 23 November 2012

National Conference Proceedings (Year: 2012-2013)

  • M. R. Birajdar, R. G. Gore, “Exergy Analysis of a Horizontal Wind Turbine” , National Conference on Innovations and Emerging Trends in Mechanical Engineering, organized by JSCOE , Pune, 21-22 March 2013
  • S. A. Kale, Dr. S. N. Sapali, “Micro Wind Turbines  Technology, Market, Myths And Innovations” , National Conference on Recent Advances in Mechanical Engineering and their impacts on Indian Industries, 2012, organized by PDA Engineering College , Gulbarga, Karnataka. 20-22 Sept 2012.
  • S. A. Kale, Dr. S. N. Sapali, “Technology Transfer For Indian Wind Power Sector”, National Conference on Recent Advances in Mechanical Engineering and their impacts on Indian Industries 2012, organized by PDA Engineering College , Gulbarga, Karnataka. 20-22 Sept 2012 .

International Journals

  • M.R. Birajdar, " Numerical Analysis of New Airfoils for Small Wind Turbine Blade", STM journals2230-7982, Volume 6, Issue 1, 2015
  • M.R. Birajdar, "Effects of Design Parameters on Aerodynamic Performance of NEW PROFILE Small Wind Turbine Blades ", ISET2015,ICDMM2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune11-13 February 2015
  • M.R. Birajdar, "wind tunel testing of wind turbine", ISET2015,ICDMM2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune11-13 February 2015
  • M.R. Birajdar, "wind generator for small wind turbine ", ISET2015,ICDMM2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune11-13 February 2015
  • v.j.hole, "Generation of Plasma Energy using lithium in heat pipe oven plasma chamber ", ISET2015,ICDMM2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune11-13 February 2015
  • Kulkarni Swanand Ramesh, ""Materials for small wind turbine blades"", Renewable energy and sustainable development, Nova Science publishers, ISBN978-1-63463-429-8pp-43-53, 42005
  • Kulkarni Swanand Ramesh, ""Innovative approach of material selection for brake drum"", ISET2015,ICDMM2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune42036
  • Kulkarni Swanand Ramesh, ""Static strength design of small wind turbine blade"", ISET2015,ICDMM2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune42036
  • Kulkarni Swanand Ramesh, ""Wind turbine simulatation for wind generator, a review "", ISET2015,ICESD2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune42036
  • Kulkarni Swanand Ramesh, ""Generation of plasma energy using lithium in heat pipe oven plasma chamber "", ISET2015,ICESD2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune42036
  • Kulkarni Swanand Ramesh, ""Analyzing effect of varying pitch of cut corrugated twisted tape insert on augmentation of heat transfer"", ISET2015,ICESD2015, 11-13 feb 2015, KJEI's Trinity College of Engineering and Pune42036
  • Pathan Khizar Ahmed, "ANALYSIS OF COMPOSITE SQUARE CROSS-SECTION BEAM", International Symposium on Engineering and Technology (ISET-2015) ICDMM201511-13 February 2015
  • Pathan Khizar Ahmed, "FAILURE ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER BY FEA TOOLS", International Symposium on Engineering and Technology (ISET-2015) ICDMM201511-13 February 2015
  • Pathan Khizar Ahmed, "REVIEW PAPER ON MANUFACTURING METHODS OF FIBER COMPOSITE MATERIALS", International Symposium on Engineering and Technology (ISET-2015) ICDMM201511-13 February 2015
  • Pathan Khizar Ahmed, "Piston Design and Analysis by Using FEA 2015", International Symposium on Engineering and Technology (ISET-2015) ICDMM201511-13 February 2015
  • Pathan Khizar Ahmed, "ANALYZING EFFECT OF VARYING PITCH OF CUT CORRUGATED TWISTED TAPE INSERT ON AUGMENTATION OF HEAT TRANSFER", International Symposium on Engineering and Technology (ISET-2015) ICESD201511-13 February 2015
  • Pathan Khizar Ahmed, "REVIEW OF HEAT TRANSFER ENHANCEMENT USING COIL WIRE INSERT IN CIRCULAR TUBE", International Symposium on Engineering and Technology (ISET-2015) ICESD201511-13 February 2015.
  • Prof. G. P. Bharambe has participated in, “ RF & Microwave Test Symposium 2016” organized on 10th March 2016 at Pride Hotel Shivaji Nagar, Pune.
  • Prof. P. P. Akarte has attended two days faculty development program on “Finite Element Methods for Engineering Applications (FEM-FEA 2016)”, held on 22 & 23 January 2016 at department of Mechanical Engineering, SRES’s College of Engineering Kopargaon.
  • Prof. A. N. Korshetti has attended one week STTP on ADVANCED WELDING TECHNOLOGY held on 7th & 8th December 2015 at VIIT, Pune.

 

Best Engg. College, Pune