KJ's Educational Institutes

Trinity Academy of Engineering, Pune

( Approved by AICTE, New Delhi, Govt. of Maharashtra & affiliated to Savitribai Phule Pune University, DTE Code : EN6634)

Accredited by NAAC with ‘A+’ Grade

MECHANICAL ENGINEERING

Research

R&D Cell has been established to promote and monitor the research Programs of the College. R & D cell is headed by Dr. Manoj Kumar Chaudhary, (Assistant Professor & Dean, Research). The aim of research and development (R&D) is to improve the current technologies offered by an organization or to develop innovations that strengthen the organization’s position. R&D cell in mechanical department facilitates internet facility along with latest software’s that are required in mechanical field for design, analysis and simulation purpose.

Click here for Research & Development Cell Inauguration Program
Details of Research Papers Published by Faculty A. Y. 2017-22
Details of Paper Presented / Published in Conferences A. Y. 2017-22
Research

List of Research work of Faculties:

  • K. B. Gavali, Manoj K. Chaudhary, N. R. Kadam, Design and Testing of Innovative Airfoil for Small Horizontal Axis Wind Turbine Blade at Low Reynolds Number, EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy (In press) Dec, 2024, (Scopus).
  • Sagar Gadakh, , K.B. Gavali , Manoj Kumar Chaudhary , Meet Mehta, Design and Development of New Airfoil for Small Horizontal Axis Wind Turbine Blade at Low Wind Speed, International Journal of Advance Research in Science and Engineering, Volume 12, Part 9, 2023, Pages 26-32, Sep, 2023, (Scopus).
  • Vijay Dilip Kolate, P. D. Darade, Harshada Deshmukh, S. R. Patil, Emerging Technologies in Displacement Amplification of Lever and Bridge-Type Compliant Mechanism: A Review, Article, Journal of Physics: Conference Series 2601 (2023) 012021, IOP Publishing doi:10.1088/1742-6596/2601/1/012021.
  • Manoj K. Chaudhary, N. R. Kadam, K. B. Gavali, Design and Testing of Innovative Airfoil for Small Horizontal Axis Wind Turbine Blade at Low Reynolds Number, EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy (In press) Dec, 2024, (Scopus).
  • Manoj K. Chaudhary , Pankaj N. Shrirao ,A. N. Ingale, S. V. Giri, CFD Analysis of heat transfer and flow behavior of fluid flowing over the straight and twisted square fin, Journal of Advance Research in Science and Engineering, Volume 12, Part 9, 2023, Pages 26-32, Sep, 2023, (Scopus).
  • K.B. Gavali , Manoj Kumar Chaudhary , Sagar Gadakh, Meet Mehta, Design and Development of New Airfoil for Small Horizontal Axis Wind Turbine Blade at Low Wind Speed, International Journal of Advance Research in Science and Engineering, Volume 12, Part 9, 2023, Pages 26-32, Sep, 2023, (Scopus).
  • Khandu Gavali , Improvisation Of Efficiency Of Heat Pipe,., Journal of Xidian University Publisher: Science Press, Journal of Xidian University VOLUME 17, ISSUE 5, 2023 pp 979-991, May 2023, (Scopus).
  • Khandu Gavali , Speed Control Based Anti-Collision System – By Using Distance Measuring Sensor or “Ev”., GRADIVA REVIEW JOURNAL, Publisher: GRADIVA GRADIVA REVIEW JOURNAL, volume 9 issue 5 ,2023 (Scopus).
  • Prajakta Kadam , Vaibhav Rahinj , Nikhil Kadam, ManojKumar Chaudhary, Khandu Gavali , and Satish Deshmukh, Evaluation of Cutting Parameters in Turning Operation of AISI 4140 using Al2O3 Inserts Via. Taguchi Method, Journal For Basic Sciences, 1006-8341, pp-865-871, Volume 23, Issue 3, 2023, (Scopus).
  • Nikhil Kadam, Prajakta Kadam, Adinath Damale, G Karthieyan, D M Kulkarni, Investigation on the Microstructure, Thermo-physical and Mechanical Characterization of Laser re-melted Plasma Sprayed 8YSZ TBCs, Lasers in Engineering, 0898-1507,2023. (Scopus).
  • Vijay Dilip Kolate, Manoj Kumar Chaudhary, Sandeep S. Kore, Adhikrao Sarjerao Patil, Computational Study and Enhancement of Heat Transfer Rate by Using Inserts Introduced in a Heat Exchanger, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2289-7879 ,Vol 103, Issue 1, 2023, Pages 16-29, Jan, 2023, (Scopus).
  • Vaibhav Rahinj , Prajakta Kadam , Nikhil Kadam, ManojKumar Chaudhary, Khandu Gavali , and Satish Deshmukh, Evaluation of Cutting Parameters in Turning Operation of AISI 4140 using Al2O3 Inserts Via. Taguchi Method, Journal For Basic Sciences, 1006-8341, pp-865-871, Volume 23, Issue 3, 2023, (Scopus).
  • Nikhil Kadam, Prajakta Kadam, Influence of spray angle onto the microstructural and mechanical properties of air plasma sprayed 8YSZ TBCs, Materials Today: Proceedings, 2214-7853, Nov. 2022. (Scopus).
  • Prajakta Kadam, Nikhil Kadam, Adinath Damale, G Karthieyan, D M Kulkarni, Investigation on the Microstructure, Thermo-physical and Mechanical Characterization of Laser re-melted Plasma Sprayed 8YSZ TBCs, Lasers in Engineering, 0898-1507,2023. (Scopus).
  • Manoj Kumar Chaudhary, Sandeep S. Kore, Adhikrao Sarjerao Patil, Vijay Dilip Kolate, Computational Study and Enhancement of Heat Transfer Rate by Using Inserts Introduced in a Heat Exchanger, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2289-7879 ,Vol 103, Issue 1, 2023, Pages 16-29, Jan, 2023, (Scopus).
  • Khandu Gavali , Prajakta Kadam , Vaibhav Rahinj , Nikhil Kadam, ManojKumar Chaudhary, and Satish Deshmukh, Evaluation of Cutting Parameters in Turning Operation of AISI 4140 using Al2O3 Inserts Via. Taguchi Method, Journal For Basic Sciences, 1006-8341, pp-865-871, Volume 23, Issue 3, 2023, (Scopus).
  • Manoj Kumar Chaudhary, Pankaj N Shrirao, Amol N Patil, Performance evaluation of heat transfer characteristics of heat exchanger in longitudinal fluid flow with serpentine tubes of constant pitch, Materials Today: Proceedings, Volume 72, Part 3, 2023, Pages 864-869, Sep, 2022, (Scopus).
  • Prof. Gavali K. B.is working on the research topic “Industrial engineering, job shop scheduling” Research Scholar, Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore-641021, India
  • Prof. Mahesh Shewale is working on research topic ”Mechatronics Control Systems”Research Assistant at Indiana University Purdue University Indinapolis (IUPUI)

Publications:

  • K.B.Gavali, ”Job Shop Scheduling With the Aid of Hybrid Social Spider Optimization and Gray Wolf Optimization with Industrial Scheduling Case Study",International Journal of Mechanical Engineering and Technology, vol. 8-10,ISSN No.0976-6359.

  • K.B.Gavali,”Effective Utilization of Job Shop Schedulingin Auto Industries with the aid of Social Spider Optimization",Journal of Green Engineering, vol. 8-4,ISSN No.1904-4720.

  • K.A.Katake,”Design and Fabrication of 360 degree Conveyor System with Up-Down Mechanism”,International Journalof Mechanical Robotics and Production Engineering, vol.8-6, ISSN: 2349-3534, UGC.

  • S.B.Harsur,”Automation of Hydraulic Press to Reduce Cycle Time”, International Journal For Scientific Research and Development, issue 6/9, ISSN : 2321-0613,

  • S.B.Harsur,”Ergonomics and Safety for Hydraulic Press Machine,”International Journal of Management, technology and Engineering, issue 8/9, ISSN:2249-7455, UGC.

  • Shambhu Kumar,”Semi Automatic Pneumatic Gear box & Lubrication system",International Advanced Research Journal in Science, Engineering & Technology, Vol.5, issue 12, ISSN:2394-1588.

  • Shambhu Kumar,”Automatic Gear Shifter for Two Wheelers",International Journal for Scientific Research & Development, Vol.6, issue 11,ISSN:2321-0713.

  • K.B.Gavali,”Performance Enhancement in Job Shop Scheduling with the Aid of Hybrid Social Spider Optimization and Gray Wolf Optimization",International Journal of Applied Engineering Research, issue 12-21, ISSN:0973-4562, UGC.

  • V.D. Kolate,”Static Structural Analysis and Optimization of Pneumatic Compressor Connecting Rod,” International Journal of Science and Research (IJSR), Issue 6-6,ISSN 2319-7064,UGC.

  • V.D. Kolate,”Design and Development of Anti-Roll Back Mechanism,” International Journal of Science and Research (IJSR), Issue 6-6,ISSN 2319-7064,UGC.

  • V.D. Kolate,”Development of Transportation Structure of Industrial Trolley,” International Journal of Science and Research (IJSR), Issue 6-6,ISSN 2319-7064,UGC.

  • Sandeep P. Nalavade, Patange Abhishek D, Sharad S. Mulik, Mahesh S. Shewale,” Novel Machine Health Monitoring System", Advances in Intelligent Systems and Computing (AISC), issue 828, Springer

  • Sandeep P. Nalavade, Patange Abhishek D, Sharad S. Mulik, Mahesh S. Shewale,” Development of 12 Channel Temperature Acquisition Systems for Heat Exchanger Using MAX6675 and Arduino Interface", Lect. Notes Mechanical Engineering, Springer.

  • Sandeep P. Nalavade, Patange Abhishek D, Sharad S. Mulik, Mahesh S. Shewale,”Review of Vibration Monitoring Techniques Using Low Cost Sensors and Microcontrollers,”Journal of Mechatronics and Automation, vol.4\2, ISSN No.2455-1988, UGC.

  • Sandeep P. Nalavade, Patange Abhishek D, Sharad S. Mulik, Mahesh S. Shewale,”Development of 12 channel temperature acquisition system for heat exchanger",3rd International conference on "Innovative Design, Analysis and Development Practices in Aeronautical and Automobile Engineering

  • Sandeep P. Nalavade, Patange Abhishek D, Sharad S. Mulik, Mahesh S. Shewale,”Novel Machine Health Monitoring System",International Conference on Data Engineering and Communication Technology.

  • K.A.Katake,”Analysis and Comparision of Metal Matrix and Steel Connecting Rod,”International Journal for Research in Applied Science and Engineering, Issue: 8/X,ISSN: 2321-9653,UGC.

  • Patange Abhishek D.,”A Review on Wavelet Transform Techniques used for Machine Health Monitoring",NCRDMECE.

  • Patange Abhishek D.,”A Review on Wavelet Transform Techniques used for Machine Health Monitoring",NCRDMECE.

  • Patange Abhishek D.,”Modeling and Analysis of Unmanned Remote Guided Vehicle on Rough and Loose Snow Terrain",NCRDMECE.

B.E. Projects

Academic Year 2018-19 B.E. Project
Study and Testing of Adsorption Refrigeration System in Automobile Air Conditioning Powered by Exhaust Gases

It is a well-known fact that a large amount of heat energy associated with the exhaust gases from an engine is wasted. A rough energy balance of the available energy in the combustion of fuel in a motor car engine shows that on third is converted into shaft work, one third is lost at radiator and one third is wasted as heat at the exhaust system, even for relatively small car engine. Heat energy can be utilized from the exhaust gas this heat energy is enough to power an adsorption air conditioning system to produce the air conditioning effect. ADSORPTION :- Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface. This process creates a film of the adsorbate on the surface of the adsorbent. This process differs from absorbtion, in which a fluid is dissolved by or permeates a liquid or solid respectively.

Academic Year 2018-19 B.E. Project
Design & Fabrication of lever operated wheel chair for disabled persons with no legs

This Project includes the design and fabrication of lever propelled wheelchair. There are many people who are disabled due to some injuries or other drastic diseases. So, there are various techniques used in the improvement of the conventional wheelchair. Researchers used the techniques like HMI, HCL and Accelerometer in the wheelchair. It improved the basic model but there are some people who cannot afford such advanced wheelchair. So, in this design we are using the lever for transmitting the force to move wheelchair instead of applying the force on push rim. We are using the basic mechanisms for the movement of wheelchair. The wheelchair is designed in a such a way that it requires less efforts and it is cheaper then the other advanced wheelchairs.

Academic Year 2018-19 B.E. Project
Train axle power generation through magnetic couplings

The movement of the train was not used for generation of power since diesel engine innovation. The utilization of the moving train to produce electricity can be done So the production of electricity by using the concept of the rotation of secondary shaft due to the primary railway axle. It is caused by the moving train by using an electrical power generation system. This device could be placed along railway bogies or locomotive axles. An electrical power generation system comprises a variable capacitor and a power source. The magnetic coupling here by used will transfer power from locomotive axle to the generator shaft without contact that will implies no contact / friction load on railway locomotive shaft. That will beneficial for power generation without altering or damaging ongoing system.

Academic Year 2018-19 B.E. Project
Automatic Gear Shifter for Two Wheelers

According to reports shown in feb-2018 the production of manual transmission have fallen to 30% and while the modern automatic transmission have increased to 70% of its production. As the demands of gearless bikes has been increased. This paper aims to introduce one such kind of automatic transmission which is Pneumatic Gear Shifter. It is system which will change the gear automatically with help of Microcontroller Unit, Control Unit, Pneumatic Cylinders, Hoses and Sensors.

Academic Year 2018-19 B.E. Project
Designing a Boiler Chimney System to Enhance Boiler Efficiency Against Fouling

The industrial boilers are working on very high temperature & pressure. And the some flue gasses forms in the boiler which required to exhaust in atmosphere. Because of this the boiler chimneys are provided to the boiler. Through the chimney that gasses are exhausted to the atmosphere. But some fouling are forms in the chimney. And after some period that chimneys will get blocked. And in existing chimney system hasn’t any provision to clean the particulate filters. There for this will reduce the efficiency of boiler and increase the chances of accident. Now our project is to redesigning of the boiler chimney against fouling creation. Our attempt in the way to reduce the fouling forms in the chimney. For this we provides such design which allows the particulate filter cleaning after some period. The design has to allow for quick maintenance without interfering with the boiler operations.